If your borehole has stopped producing water, the pump has failed, or your water quality has suddenly changed — you need a correct diagnosis before spending money on a fix. Most borehole problems in Ghana are repairable at a fraction of redrilling cost. AquaProbe diagnoses before quoting and responds to all WhatsApp repair messages within 24 hours.
Do not abandon your borehole without a proper assessment. AquaProbe has restored boreholes that contractors told clients were "finished." The aquifer is almost always fine — the problem is usually the pump, silting or a casing fault.
Common Problems & Likely Causes
| Symptom | Most Likely Cause | Fix |
|---|---|---|
| No water at all | Pump failure or electrical fault | Pump inspection and repair or replacement |
| Reduced yield | Silting or pump wear | Flushing, redevelopment or pump service |
| Sandy/cloudy water | Damaged pump screen or silting | Pump replacement or borehole flushing |
| Rusty/orange water | High iron or corroded casing | Water quality test, iron filter or pump replacement |
| Pump tripping breaker | Motor overload or wiring fault | Electrical diagnosis and repair |
Repair Services We Offer
- Pump inspection, service and replacement
- Borehole flushing and jetting — restores original yield in most cases
- Full borehole rehabilitation — flushing, redevelopment, screen cleaning and yield re-test
- Casing inspection and repair
- Electrical and control system repair
- Water quality testing and treatment system installation
Borehole problem? 24-hour response.
WhatsApp us your symptoms and location. We diagnose before we quote — save up to 60% on repair services today.
WhatsApp for repair help →Frequently Asked Questions
Can a dry borehole be restored?
Often yes — if the aquifer has not genuinely failed (which is rare), the problem is usually silting, pump failure or casing damage, all of which are repairable.
How much does borehole repair cost in Ghana?
Costs depend on the fault type. WhatsApp us your symptoms for a diagnostic estimate before committing to any work.
How long does rehabilitation take?
A standard flush takes 1–2 days. Full rehabilitation with CCTV inspection takes 2–4 days.